Wish List | Azaleas & Rhododendrons | Camellias | Hydrangeas | Best | Accessibility | Directions

at Loder-Plants.com Search For :   Tel: +44 (0)1403 891 412
Soil acidity

Rhododendrons grow best in acid soil with a pH factor somewhere between 4.5 and 5.8. If the rhododendron has been grafted on to a tough, tolerant species, it may be able to cope with a pH factor of 6.5. The pH factor of most cultivated gardens is usually somewhere between 5 and 8, so, sometimes, the soil might be too alkaline for rhododendrons.

pH factor

The pH factor (from Latin potentia hyrogenii - potency of water) defines the whole range of chemical reactions, from acid to alkaline, in the soil on a scale of 1-14. Factor 7 is a neutral reaction of the soil. Factors below this are more or less acid; factors above 7 indicate alkaline soil. The pH factor is largely determined by the chalk or lime content in the soil. The more chalk there is in the soil, the higher the pH factor will register, which means the lower the acid content will be.

How to determine the pH value

A slightly acidic soil is the determining factor for the well-being of rhododendrons. If you are planting them for the first time, you should definitely test your soil first. Various testers are available in the gardening trade, so you will be able to determine your own garden's pH factor quite easily.

  1. Take a handful of soil from six difterent spots in the place where you intend to plant your rhododendrons.
  2. Mix the samples together thoroughly.
  3. Pour distilled water on to approximately 1 tsp of this mixture.
  4. Use an indicator strip and the colour scale supplied with your soil tester to determine the pH factor. If you want a really exact reading, you can send your samples to a soiI research institute, where the factor will be determined very accurately. You can obtain the address of such a place from your local garden centre.

As described above, take soil samples from six different spots, mix them, put them in a plastic bag and send them to the soil institute.

What happens if the pH factor is incorrect?

If the pH factor is too high, plants which are accustomed to acid soils can no longer absorb iron or magnesium, both of which are essential for the formation of chlorophyll.

The result will be yellowing leaves, which may show green veins to begin with, followed by a complete cessation of growth in the entire plant. The higher the pH factor stands above 7, the more visible these symptoms of deficiency will become. This condition is called chlorosis. If the pH factor is too low (below 4), on the other hand, the roots will be damaged. The plant will not develop new roots and will eventually be unable to absorb nutrients.

How to lower the pH factor

The best way to lower the pH factor is by working peat into the soil. If you would like to lower the pH factor by one point, for example from 6.5 to 5.5, you would have to reckon on about six bales of moist peat worked in to a depth of 30cm (12in) over an area of 10sq m (12sq yd).

How to raise the pH factor

Use lime to raise the pH factor. To raise the factor by one point on the scale (for example, from 3.5 to 4.5), sprinkle the following amounts of lime on 10sq m (12sq yd):

  1. on a light soil, 1.5kg (3.3lb) grey lime or 3kg (6.6lb) grey calcium carbonate;

  2. on a medium-heavy soil, 2.5kg (5.5lb) grey slag lime;

  3. on heavy soil, 3kg (6.6lb) grey slag lime.
Web hortic.com